How to Resolve Error Code 5011 on Canon Printers

Canon error 5011 is typically caused by a problem with the cartridge holder becoming stuck inside. Users are unable to scan due to a printer issue. On the other hand, putting your Canon Printer Error Code 5011 Solution ideas into action can be difficult. The problem could be due to a manufacturing flaw. Some of the options listed below may be helpful in fixing the issue.

Canon printer error code 5011 appears on the screen when there is a problem with the printer cartridge holder, which is completely jammed in the printer, resulting in an error code 5011. However, this mistake is common on a variety of Canon printer models, and it is a faulty Canon printer issue that prevents consumers from continuing the scanning process. However, resolving the error code 5011 as soon as possible is critical for a good printing experience with the Canon printer. We present some troubleshooting strategies to assist you in resolving error number 5011 without causing any unnecessary inconvenience to consumers.

How to Fix Canon Printer Error Code 5011

Before beginning the Canon Printer Error Code 5011 Solution procedure, we recommend that you carefully follow the steps outlined below to avoid problems and save time. These problems can be more difficult and time-consuming to correct. The procedure for resolving the Canon printer error code 5011 is simple and straightforward. Learn how to quickly get rid of:

Step 1: Turn on your Canon printer for the first time.

1. Disconnect the power cord from the power switch first.
2. Reconnect the power line to the Power switch after waiting 10 minutes.
3. Turn off the printer and carefully open the machine’s lid to change the Canon printer’s ink cartridge.
4. After making the changes, turn on the printer and close the lid again while it initializes.
5. Long press the ‘Power + Cancel’ tab simultaneously after a second power-off.
6. Press and hold the power tab while gradually removing the “Cancel” tab.
7. After clicking the “Cancel” tab at least four times, release both tabs at the same time.

Step 2: Look for any bits of paper in the machine.

The user must ensure that no paper fragments are lodged inside the machine when using this procedure. Check to see whether anything is stuck within the machine, such as a piece of paper.

Step 3: Clean the Encoder Strip

If the aforementioned methods have failed to resolve the Canon printer problem 5011, you might try cleaning the encoder strip, which is located beneath the carriage. From left to right, the carriage moves.

Step 4: Try turning the printer on and off again.

For the next 10 minutes, disconnect the printer from the power source, then reconnect it to run a test. You should lift the lid of your printer and switch it on while it is open.

Close the lid to see if the Canon support code 5011 issue has been resolved. If none of the previously recommended repairs work, your printer machine will need to be repaired. If this solves the problem, wonderful; if it doesn’t, you can contact the printer support staff.

References: Fix Canon Printer Error Code 5011